HQ

プレスリリース・ニュース

 

 

新着情報

    05
     
    9月
    Kobe

    ニュース記事

    国際フロンティア産業メッセ2024

    国際フロンティア産業メッセ 2024は、西日本最大級の産業総合展示会です。関西エリアを中心とした企業や大学・研究機関の出展社による先端技術の紹介や新事業創出の基盤となる製品が展示されます。ペリー・ジャパン株式会社は、神戸市(ドイツパビリオン)に出展します。
    17
     
    4月
    Danjiang Bridge

    プレスリリース

    Above water and clouds: Danjiang Bridge reaches record-breaking proportions with PERI Systems

    The Danjiang Bridge over the Tamsui River on the outskirts of Taipei is taking giant strides towards record-breaking proportions. The structure, designed by Zaha Hadid, is expected to be the world’s longest asymmetric cable-stayed bridge upon completion in 2025, at an impressive 920.00 metres.
    13
     
    12月
    The 26 m high rear tower was a complex structure as it could not be tied and anchored in the usual way. There was also a historic statue in the centre of the scaffolding that needed to be protected. (Photo: PERI SE)
    In addition to the elements of the PERI UP Scaffolding Kit, VT girders and 3-ply plywood were used to form various platforms, while SRU steel walers and tie rods were applied for anchoring the scaffolding to the counterweights. (Photo: PERI SE)
    Multiple access points were created to support the safe execution of the choreography planned for the event. With the PERI UP Scaffolding System, these internal passages could be realised without problems. (Photo: PERI SE)

    プレスリリース

    Visionary stage design realised with 200 tonnes of PERI UP scaffolding

    World Youth Day (WYD) is an international event where young people from all over the world gather every two or three years to meet the Pope. Founded by Pope John Paul II, WYD was first held in Rome in 1986 and has since been held in numerous cities around the world. In 2023, the event was organised in Lisbon during the first week of August and attracted around 1.5 million participants.
    20
     
    9月
    PERI is playing an instrumental and successful role in Groß & Partner’s “FOUR Frankfurt” inner-city project with a wide range of systems for formwork and scaffolding applications, not to mention climbing technology that is subject to the most stringent safety regulations and a sophisticated logistics concept.

    プレスリリース

    Four towers grow at once thanks to PERI systems

    Four up to 233-m-high futuristic towers will soon soar high into the heart of Frankfurt’s skyline in keeping with the project’s slogan “Feel the City”. PERI is playing an instrumental and successful role in the FOUR Frankfurt inner-city project with a wide range of systems from the formwork, scaffolding and climbing technology segments subject to the most stringent safety regulations and a sophisticated logistics concept.
    13
     
    1月
    With effect from 1 January 2023, PERI Vertrieb Deutschland GmbH & Co. KG has acquired Implenia Schalungsbau GmbH in Bobenheim-Roxheim, Germany.

    プレスリリース

    PERI acquires Implenia Schalungsbau GmbH

    With effect from 1 January 2023, PERI Vertrieb Deutschland GmbH & Co. KG has acquired Implenia Schalungsbau GmbH in Bobenheim-Roxheim, Germany. For the time being, the company will be managed under the name PERI Schalungsbau GmbH as a subsidiary of PERI Germany.
    01
     
    1月
    The A26 project stands out on account of its five different tunnel cross-sections. In addition, the bends feature tight radii of 50 m to 750 m and the tunnel gradients vary, making it difficult to implement the new transport network.
    To construct the 1,600-m-long access tunnel, PERI engineers developed the first customised and fully hydraulic special-purpose formwork carriage. This alone was sufficient to construct the different cross-sections in a total of 170 concreting sections.
    Given the fact that the very tight curve radii made it difficult to transport the tunnel carriage, an innovative caterpillar system was used to move it.

    プレスリリース

    Various tunnel cross-sections with first fully hydraulic formwork carriage with caterpillar drive

    The A26 project is one of the most important infrastructure projects in the Austrian city of Linz and the surrounding area with the goal to ease congestion on its urban transport network. The key to success during the project implementation stage was a PERI engineering solution that was innovative, safe and efficient in equal measure, coupled with comprehensive project support. The highlight: The first fully hydraulic tunnel formwork carriage with a caterpillar drive in Austria.
    02
     
    12月
    PERI assisted with the construction of the 550-m-long and 27-m-wide drive-by platform by providing a customised formwork carriage solution.
    The 15,300 m² bridge area is supported by 70 V-shaped columns at a height of over 10 m.
    The 70 V-shaped columns were also constructed with the help of PERI formwork systems.

    プレスリリース

    Customised formwork carriage cuts construction time by several months

    At the south end of Frankfurt Airport, Terminal 3, with its futuristic design, is currently one of Europe’s largest infrastructure projects. Upon completion of construction in 2024, up to 19 million travellers will be able to arrive at and depart from the three new gates each year. PERI assisted Max Bögl with the construction of the drive-by platform, which will in future provide passengers with direct access to the departure level of Terminal 3. 
    22
     
    11月
    PERI is now reflecting on a very successful trade fair, having showcased numerous innovations from the formwork and scaffolding sector, and held exciting talks and discussions.
    With more than 200,000 guests, the PERI exhibition hall at bauma 2022 was a visitor magnet.
    The experts from PERI provided insight into the future of the tried-and-tested MAXIMO Panel Formwork, which is impressive in terms of efficiency and sustainability.

    プレスリリース

    PERI is reflecting on a successful bauma 2022

    With more than 200,000 visitors, the PERI exhibition hall at bauma 2022 was a visitor magnet. PERI is now reflecting on a very successful trade fair featuring numerous innovations from the formwork and scaffolding sector as well as exciting talks and discussions. In addition to a comprehensive facelift for the MAXIMO Panel Formwork, additions to the PERI UP Scaffolding Kit and ground-breaking key digital technologies, PERI showcased alternative and sustainable construction methods using MESH technology and TwistBlock Moulds.
    27
     
    10月
    The innovative split-soffit striking method speeds up the cycle time enormously, meaning that fewer formwork sets are required. (Photo: Greg Folkin Photography)
    With VSS, the side formwork can be used independently. This means that the deshuttering process can be carried out the following day and that the reinforcement work can be carried out conveniently. (Photo: Greg Folkin Photography)
    The innovative connection technology using X-Bolts and T-Bolts enables fast assembly and disassembly of the formwork. (Photo: Greg Folkin Photography)

    プレスリリース

    Innovative VARIOKIT Pier System – High performance for bridge pier construction

    Simultaneously to bauma 2022, PERI will be presenting the VARIOKIT Pier System, a system on the market which aims to revolutionise bridge construction. PERI, one of the leading manufacturers and suppliers of formwork and scaffolding systems for the modern construction sector, is setting a new standard in bridge construction with the introduction of VARIOKIT Pier System (VPS). VPS brings together safety and efficiency to provide a versatile, high-performance system for the construction of bridge piers and pier caps. VPS is based on the VARIOKIT Engineering Construction Kit, which means that almost all project requirements can be met using rentable solutions.
    24
     
    10月
    Digital solutions from PERI have their finger on the pulse and help companies actively counteract the shortage of skilled workers in the construction industry. They create more ergonomic, cleaner and safer working conditions with automated work processes.
    The innovative MESH technology is among the finalists in the digitalisation category of the bauma Innovation Award. The MESH technology makes it possible to produce complex or curved reinforcement cages, which in the past were manufactured with elaborate manual work, through an automated prefabrication process. (Photo: MESH AG)
    With the MESH technology, complex reinforced concrete components can be created entirely without formwork.
(Photo: MESH AG)

    プレスリリース

    Shaping the future: PERI presents innovative technologies for more efficiency

    With the motto “Shaping the future”, the PERI exhibition hall will open its doors on the open-air North site (Booth FN 719) at bauma 2022 in Munich from 24 to 30 October 2022. In addition to innovations from the formwork and scaffolding sector, PERI will present digital technologies for the construction projects of tomorrow. Visitors can look forward to a variety of digital planning tools, innovations in PERI InSite Construction sensor technology, the new myPERI Customer Portal and a live demonstration of 3D Construction Printing. The MESH technology, which is among the finalists for the bauma Innovation Award, is celebrating its première.
    24
     
    10月
    The modular PERI UP Facade Scaffold now has an even higher load-bearing capacity and offers greater flexibility thanks to the EVOTOP series. In addition to the introduction of further sophisticated standard assemblies, a significantly reduced number of components and ties is a major advantage in use.
    Thanks to the EVOTOP series from the PERI UP Scaffolding Kit, even wider, longer and higher facade scaffolds can be built in demanding load classes. Heavy and inflexible frames are therefore no longer required in facade scaffold construction.
    PERI UP Cladding is a newly conceived, flexible enclosure system that is the perfect addition to the PERI UP Scaffolding Kit. It helps in providing a spatial enclosure for the construction site, while being an easy-to-install and translucent shield for the construction site personnel and the surrounding area.

    プレスリリース

    Achieving success in the scaffolding trade with PERI innovations

    With the motto “Shaping the future”, the PERI exhibition hall will open its doors on the open-air site North (booth FN 719) from 24 to 30 October 2022 in Munich. A number of innovations that make scaffolding construction quicker, safer and more economical will be showcased. Something that is always at the heart of PERI’s developments is the long-term and sustainable success of the scaffolding contractor.
    24
     
    10月
    With the motto “Building Sustainability”, visitors can experience first hand how sustainability is promoted at PERI during their visit to the trade fair.
    Visitors to the PERI exhibition hall can look forward to a comprehensive facelift for the tried-and-tested MAXIMO Panel Formwork.
    PERI will present further additions to the tried-and-tested MAXIMO Panel Formwork at the bauma. The MAXIMO Shaft Corner is being supplemented by a new striking module that saves energy and enables efficient striking of the shaft corners.

    プレスリリース

    Shaping the future: PERI presents innovations for the construction industry at bauma

    With the motto “Shaping the future”, the PERI exhibition hall will open its doors on the open-air North site (booth FN 719) at bauma 2022 in Munich from 24 to 30 October 2022. With a facelift of the tried-and-tested MAXIMO Panel Formwork, innovations from the slab formwork sector as well as new digital and disruptive technologies, such as the PERI InSite Construction sensors, 3D Construction Printing and the MESH technology, the formwork and scaffolding manufacturer is preparing the construction industry for the construction site of tomorrow. In addition, visitors can experience first-hand how the topic of sustainability is promoted at PERI with many practical examples.
    29
     
    9月
    ONE by CA Immo, Frankfurt am Main, Germany - Project-specific PERI solution for new Frankfurt skyscraper

    プレスリリース

    Project-specific PERI solution for new Frankfurt skyscraper

    At a height of around 190 m, the new 49-storey office and hotel tower ONE by CA Immo is an integral part of the skyline of Frankfurt’s metropolis on the River Main. The skyscraper attracts attention in particular due to its triangular cantilever on the 33rd floor, which is visually reminiscent of the number “1” and lends the building its name.
    10
     
    8月
    The 85 m high and 485 m long Filstal Bridge brings together all the challenges of bridge construction: a sophisticated construction method with slender superstructures and high bridge piers that widen in a Y-shape at the crown, high architectural concrete requirements and a narrow time window to meet the completion deadline.
    The cantilevered parapets on the west bridge were constructed in 24-m-sections using a total of four VARIOKIT Cantilevered Parapet Carriages.
    PERI engineers assisted with the construction of the piers, superstructure and tunnel portals using their solution expertise and modular, coordinated formwork and scaffolding systems.

    プレスリリース

    Building bridges with solution expertise and modular systems

    Customer-oriented planning and services combined with coordinated modular systems form the basis for developing formwork and scaffolding solutions that are suitable for almost any site requirements, including complex infrastructure projects. Experienced PERI engineers assisted with the construction of the Filstal Bridge, bringing their extensive solution expertise to bear.
    21
     
    7月
    Robotic automated production of reinforcement cages in Zurich.
(Photo: MESH AG)
    Filling the reinforcement cages with a Sika unique concrete formulation.
(Photo: PERI SE)
    Demonstrator object near PERI Headquarter in Weissenhorn, Germany. Shows the finished highly complex reinforced concrete structure produced with reinforcement cages without formwork.
(Photo: MESH AG)

    プレスリリース

    New technology for demanding concrete structures

    Weissenhorn/Zurich, 21.07.2022. PERI SE and Sika AG are taking a stake in the Swiss startup Mesh AG. Mesh AG has developed the world's first robot-assisted technology for the efficient and cost-effective production of complex reinforced concrete structures without formwork.
    29
     
    6月
    In Incheon, South Korea, just a few kilometers from Seoul, two new luxury residential towers were built using the RCS MAX Rail Climbing System.
    The two buildings each comprise 40 stories and are 143 m high. They provide space for a total of 351 residential units.
    With the help of the RCS MAX Hydraulic Unit, malfunctions were quickly and easily detected via light signals on the hydraulic unit as well as the indication on the display.

    プレスリリース

    Synchronous climbing of all platforms: First use of the RCS MAX in South Korea

    Only a few kilometres away from the South Korean capital Seoul, two new 140 m high luxury residential towers were built under strict safety requirements and within a tight construction time. PERI met the demand for efficient construction as well as low personnel costs with the new and innovative RCS MAX Rail Climbing System. A premiere, because RCS MAX was used here for the first time on South Korean soil.
    28
     
    6月
    PERI patented the guardrail in advance as early as 1996; the principle of integrated safety is still an essential component of the PERI UP Scaffolding Kit today. This is also shown, for example, by the integrated lift lock of the decks without additional components.
    Visitors to the PERI exhibition hall can look forward to realistic exhibits – including a segment of the PERI UP weather protection roof.
    Working platforms and access solutions from the combination of PERI UP and VARIOKIT can easily be integrated into existing structures and various PERI systems. The scaffolding manufacturer will be demonstrating how this works at bauma.

    プレスリリース

    PERI shows the future of scaffolding at bauma

    From 24 to 30 October 2022, the PERI exhibition hall at the northern open-air site (booth FN 719) in Munich will have the motto “Shaping the Future”. In addition to impressive exhibits, live demonstrations, personal discussions and information events, the scaffolding and formwork manufacturer will have many more surprises in store for visitors. Among other things, PERI will be showing completely new innovations for scaffolding as well as further developments of the digital planning tools.
    28
     
    6月
    The RCS MAX Hydraulic Unit as well as the RCS MAX Drive Rails can be easily combined with existing RCS material to optimise the performance of the system.
    Complete monitoring of the climbing process is possible by light signals on the RCS MAX Hydraulic Unit and by the display.
    Whether in building construction, dam, pier head or tunnel construction – with the pre-assembled platforms, the SCS Climbing System is quickly ready for use in a wide range of applications. The particularly high load-bearing capacity ensures rapid construction progress with few climbing sections.

    プレスリリース

    PERI at bauma: Innovative solutions for civil engineering

    From 24 to 30 October 2022, the PERI exhibition hall at the northern open-air site (booth FN 719) in Munich will have the motto “Shaping the Future”. In addition to impressive exhibits, live demonstrations, personal discussions and information events, the formwork and scaffolding manufacturer will have many more surprises in store for visitors. Among other things, PERI will be showing innovations from the climbing formwork sector as well as further developments for civil engineering.
    28
     
    6月
    With a wide range of digital services and products, PERI supports its customers on the way to the digital future of construction and will be presenting numerous solutions at bauma 2022 that provide support during various project phases.
    With PERI InSite Construction (ISC), PERI is presenting a sensor portfolio that optimally supplements common formwork systems. The sensor technology comes into play exactly where highly qualified workers and many years of concreting experience are in short supply. It provides support in making informed decisions about the concreting process.
    Visitors to the trade show can try out PERI’s software and tools and digitally experience project examples in an exchange with experts. In this way, interested parties will have the opportunity to immerse themselves in extended reality directly on site or get to know the extended planning possibilities of the various apps.

    プレスリリース

    PERI shows innovative solutions for the construction site of tomorrow at bauma

    From 24 to 30 October 2022, the PERI exhibition hall at the northern open-air site (booth FN 719) in Munich will have the motto “Shaping the Future”. In addition to impressive exhibits, live demonstrations, personal discussions and information events, PERI will have numerous other surprises in store. This will allow visitors to experience the comprehensive digital service and product portfolio as well as disruptive technologies at first hand.
    28
     
    6月
    With PERI InSite Construction (ISC), PERI is presenting a sensor portfolio that optimally supplements common formwork systems. The sensor technology comes into play exactly where highly qualified workers and many years of concreting experience are in short supply. It provides support in making informed decisions about the concreting process.
    Visitors to the PERI exhibition hall can look forward to an innovative further development project from the wall formwork sector which will make the erection of walls even more economical, faster and safer in the future. PERI is also presenting new additions to the proven MAXIMO Panel Formwork.
    The SKYMAX construction kit principle with panels made of aluminium and polymer achieves a very high level of technical and economic flexibility. The lightweight polymer panels with a particularly durable formlining represent a sustainable alternative to conventional timber solutions; their use can counteract the extreme developments on the global timber market and the corresponding long delivery times.

    プレスリリース

    PERI focuses on sustainability and future viability with innovations at bauma

    From 24 to 30 October 2022, the PERI exhibition hall at the northern open-air site (booth FN 719) in Munich will have the motto “Shaping the Future”. In addition to impressive exhibits, live demonstrations, personal discussions and information events, the formwork and scaffolding manufacturer will have many more surprises in store for visitors. For example, PERI will be showing innovative further developments in the wall formwork sector as well as sustainable and digital additions for slab formwork systems.
    18
     
    5月
    During the construction of the new faculty at the Mohammed VI Polytechnic University in Morocco, an optimally coordinated PERI formwork and scaffolding solution allowed construction to be completed within a nine-month period, while maintaining high safety standards.
    With the help of ALPHADECK Slab Formwork, it proved possible to form around 120,000 m2 of slab in just nine months.
    The low weight of the ALPHADECK panels and the possibility of early striking using the drophead system reduced the material quantities required on site and minimised the time required for work processes.

    プレスリリース

    PERI enables nine-month construction period while maintaining high safety standards

    PERI supported the construction of the new campus of the Mohammed VI Polytechnic University (UM6P) in Rabat, Morocco. With reliability and customer focus, PERI managed to meet the tight construction deadline of only nine months and helped to ensure that the project was carried out according to strict safety standards. For this construction project, PERI used a just-in-time approach to supply a comprehensive overall solution from a single source, including the new ALPHADECK and HANDSET Alpha Panel Formwork as well as PERI UP Scaffolding solutions.
    11
     
    4月
    Refurbishment of GSH Bahnhofplatz 2
    7.5 m bridging structure with SLS Spindle fixed to steel construction platform. The connection to the eyelet on the landing platform was carefully planned with the help of a 3D planning system. The height of the landing platform and length of the RCS Rails came together with millimetre precision.
    The sandstone frescoes, which are over 100 years old, could be accessed easily for restoration purposes. Internal console brackets are fitted without the need for couplings in short, simple assembly sequences, thanks to the gravity lock ledger.

    プレスリリース

    Mega Scaffolding Kit comes into its own in the heart of Zurich

    Construction management firm Wanner + Fankhauser AG was responsible for planning and overseeing the general refurbishment of Bahnhofplatz 2 in Zurich. The building, built around 1890, was completely hollowed out with the exception of the steel beams, which were still intact.
    07
     
    3月
    PERI InSite Construction Pressure Monitoring Set wins three prizes
    The PERI InSite Construction (ISC) Pressure Monitoring Set has won the Product Innovation of the Year Award at the British Construction Industry Awards (BCIA)
    Determining the concrete pressure with PERI InSite Construction is very straightforward. The system is compatible with all formwork systems.

    プレスリリース

    Significant increase in efficiency through digital monitoring of concrete pressure

    The PERI InSite Construction (ISC) Pressure Monitoring Set for formwork systems has won the British Construction Industry Award for Product Innovation of the Year 2021 as well as being recognised in two categories at the Festival of Innovation and Technology 2021. The digital solution helps to optimise the concreting process on the construction site, thus saving time and cutting costs.
    13
     
    1月
    For the construction of the three bridges WS 49, WS 52 and WS 54, PERI supplied an optimally coordinated formwork and scaffolding solution based on the VARIOKIT Incremental Launching Facility, VARIO GT 24 and TRIO Column Formwork and the PERI UP Scaffolding System.
    For the construction of the three bridge structures with two superstructures each, a complete PERI solution with the VARIOKIT Incremental Launching Facility proved to be the key to success and was greatly appreciated due to reduced material quantities and time-saving handling.
    The flexible VARIOKIT Formwork Units could be individually adapted to suit the supporting construction and bridge geometry.

    プレスリリース

    Adherence to the weekly cycle with PERI VARIOKIT VIL Incremental Launching Facility

    The Expressway S3 in western Poland, with a total length of 480.70 km, runs in a southerly direction from the port of Świnoujście to the border between Poland and the Czech Republic. PERI provided support for the section between Legnica and Lubawka. For the construction of the three bridge structures with two superstructures each, a comprehensive PERI solution with the VARIOKIT Incremental Launching Facility proved to be the key to success and was greatly appreciated due to reduced material quantities and time-saving handling.
    26
     
    11月
    The coveted trophy for 1st place in the PERI Construction Exercise 2021 goes to RheinMain University in Wiesbaden.

    プレスリリース

    PERI’s international student competition successfully completed for the 13th time

    PERI offers all educational institutions involved in the field of construction the opportunity to participate in its well-known Construction Exercise, which not only provides valuable experience with specific practical application but also the chance to win attractive cash prizes.
    24
     
    11月
    PERI apprentices at the PERI training center, which was opened in 2019
    PERI apprentices at the PERI training center, which was opened in 2019
    PERI apprentices at the PERI training center, which was opened in 2019

    プレスリリース

    PERI is one of "Germany's best vocational trainers 2021"

    PERI AG is one of "Germany's best vocational trainers 2021". In the study conducted by the business magazine "Capital" and the talent platform "Ausbildung.de" for the 5th time, the family-owned company was able to achieve the best possible award of 5 stars in both the area of vocational training as well as in dual studies. PERI is thus one of the best vocational trainers in Germany.
    16
     
    11月
    The first successfully completed project with TwistBlock Moulds: the "Oloo's Children Centre" in the Kibera slum in Nairobi (Kenya) was built from over 7,200 bricks according to plans by Oliver von Malm. The school offers space for 400 children.
    The first successfully completed project with TwistBlock Moulds: the "Oloo's Children Centre" in the Kibera slum in Nairobi (Kenya) was built from over 7,200 bricks according to plans by Oliver von Malm. The school offers space for 400 children.
    The first successfully completed project with TwistBlock Moulds: the "Oloo's Children Centre" in the Kibera slum in Nairobi (Kenya) was built from over 7,200 bricks according to plans by Oliver von Malm. The school offers space for 400 children.

    プレスリリース

    German Innovation Award 2021 for PERI and “Start Somewhere”

    The "TwistBlock Moulds" formwork system co-developed by PERI has won the German Innovation Award 2021 in the "Building & Elements" category. The German Design Council, which this year already honored the 3D construction printing project in Beckum with a German Innovation Award, recognized "TwistBlock Moulds" as an innovation that advances the industry through its originality, implementation and effectiveness.
    02
     
    11月
    Austria’s first 3D-printed building is being constructed in Hausleiten, Lower Austria. Construction technology group STRABAG, together with PERI, the formwork and scaffolding manufacturer and a pioneer in 3D concrete printing, is realising a roughly 125 m² office building next to its asphalt mixing plant in Hausleiten.

    プレスリリース

    PERI and STRABAG print first building in Austria

    Austria’s first 3D-printed building is being constructed in Hausleiten, Lower Austria. Construction technology group STRABAG, together with PERI, the formwork and scaffolding manufacturer and a pioneer in 3D concrete printing, is realising a roughly 125 m² office building next to its asphalt mixing plant in Hausleiten. The pure printing time for the building extension is approx. 45 hours. The special dry mortar for the construction 3D printing project "Tector Print", with long workability and good pumpability, is being supplied by Lafarge.
    28
     
    10月
    Jürgen Voss will become Chief Financial Officer (CFO) of the PERI Group on 1 January 2022.

    プレスリリース

    Jürgen Voss appointed new Chief Financial Officer at PERI

    Jürgen Voss will become Chief Financial Officer (CFO) of the PERI Group on 1 January 2022. He takes over this position from Christian Schwörer, who had held it on a transitional basis since 1 May 2021 in addition to his role as Chairman of the Executive Board (CEO).
    26
     
    10月
    Within a 16-month construction period, almost 97,500 m<sup>2</sup> of formwork solutions were used – including customised PERI special formwork elements.
(Photo: Thilo Ross)
    The results of using the highest quality architectural concrete class SB 4 and the finest white concrete are visible in the many architectural highlights: Spectacularly twisted tree-like supports, creatively patterned facade prefabricated concrete elements and sharp-edged beams in a radial pattern.
(Photo: Thilo Ross)
    The three groups of tree-like supports tower over three storeys in the foyer. PERI developed a highly complex 3D special formwork made of steel elements with an overall height of 150 mm, which consisted of 63 individually designed and CNC laser-cut individual parts.
(Photo: Thilo Ross)

    プレスリリース

    PERI assists with the construction of the new headquarters of HeidelbergCement

    Highest architectural concrete quality and extraordinary architecture: The new group headquarters of the building materials manufacturer HeidelbergCement is stunning with its bright, light-flooded rooms and the radial elements made of white concrete. Within a 16-month construction period, almost 97,500 m2 of formwork solutions were used – including customised PERI special formwork elements.
    07
     
    9月
    The ISC Temperature Sensor Cables continuously measure the temperature of the concrete. The ISC Temperature Sensor Cables are very easy to install: They are installed in the reinforcement prior to the concreting process.
    To transmit measured values, the sensors are then connected to an ISC Temperature Sensor Node.
    The ISC Temperature Nodes can be affixed almost anywhere, for example to the formwork or a guardrail.

    プレスリリース

    Optimised concreting processes by measuring the concrete temperature and maturity with PERI sensors

    With PERI InSite Construction, PERI is bringing various digital solutions to market that optimise the concreting process on the construction site and help to save time and cut costs. The key: a measuring device, a cloud and the sensors themselves. These include the PERI InSite Construction Temperature Monitoring and Concrete Maturity Kit for efficient measurement of the temperature and determination of the maturity of the concrete.
    06
     
    8月
    The 160 m long tunnel was cast monolithically in a total of nine sections – with only one VTC Tunnel Formwork Carriage.
    With a customised VTC Tunnel Formwork Carriage, consisting of standard components from the VARIOKIT Engineering Construction Kit in combination with GT 24 Girders and Battens in different lengths, the project requirements could be met.
    In total, the tunnel was cast in nine concreting sections, each 17 m long and 8 m high. The combination of concreting sequence and the high speed of the VTC System helped to save a full ten days per cycle.

    プレスリリース

    VARIOKIT VTC Tunnel Formwork Carriage supports construction of Werrington Grade Separation tunnel

    For the construction of the Werrington Grade Separation tunnel, the VARIOKIT VTC Tunnel Formwork Carriage and other PERI standard components were used for a solution which, despite its rectangular structure, delivered a curved result. Optimally coordinated formwork and scaffolding solutions from a single source, as well as clever advance planning services, ensured that the project ran smoothly.
    28
     
    7月
    An exterior view of the 3D printed house in Beckum.
    An interior view of the 3D printed house in Beckum.
    A cake at the opening. f.l.t.r. Architect Waldemar Korte (Mense - Korte Ingenieure + Architekten), Dr. Fabian Meyer-Broetz (Head of 3D Construction Printing, PERI AG), Dr. Jennifer Scheydt (Head of Engineering & Innovation, HeidelbergCement AG), Minister Ina Scharrenbach, Michael Gerdhenrich (Mayor of Beckum), Henning Rehbaum (2nd row hidden, MdL NRW).

    プレスリリース

    Germany´s first printed house officially openend

    Germany's first printed house is ready for occupancy. Today, the single-family house printed by PERI using a COBOD BOD2 printer was officially opened in Beckum, North Rhine-Westphalia, by Ina Scharrenbach, Minister for Home, Municipal Affairs, Construction and Equality of the State of North Rhine-Westphalia. The state of North Rhine-Westphalia subsidized the project as part of its "Innovative Building" funding program.
    25
     
    5月
    State-of-the-art, BIM-based scaffold planning and innovative PERI systems were instrumental in the construction of the new vitamin A complex at BASF SE in Ludwigshafen, Germany.
    At peak times, up to 1,300 t of PERI system material were in use on a daily basis.
    The 30-m-high heavy-duty platforms and a bridging construction on the northern side of the building proved to be challenging aspects of the PERI scaffolding solution.

    プレスリリース

    A modern approach to planning and work operations in industrial scaffolding construction

    In the industrial environment more than anywhere else, process and operational reliability requirements are particularly stringent. At BASF SE in Ludwigshafen, Germany, PERI has demonstrated that safety and cost-effectiveness can be combined with ease by making use of state-of-the-art, BIM-based scaffold planning and innovative systems.
    13
     
    4月
    Numerous PERI systems were used during the construction of what is currently the deepest diving pool in the world with a depth of up to 45.50 metres. (Photo: Irena Stangierska)
    Deepspot is divided into two areas, the main section with a depth of 15.50 m and an additional diving tube with a total depth of 40.50 m, which connects to the main area at one edge of the pool.
(Photo: Irena Stangierska)
    ST 100 Stacking Towers were used to support the underwater viewing bridge. For reasons of statics, these could only be dismantled when the diving pool was already filled with water. Professional divers were deployed.
(Photo: Irena Stangierska)

    プレスリリース

    Diving in Poland: PERI constructs the deepest diving pool in the world

    Far away from the world's well-known diving paradises, the Polish city of Mszczonów has become home to what is currently the deepest diving pool in the world. Numerous PERI systems were used for the construction of the pool, which has a depth of up to 45.50 metres. The special highlight was the dismantling of the ST 100 Stacking Towers used: for reasons relating to the static requirements, the stacking towers could only be dismantled after the pool had been filled with water – not by the company's own construction site staff, but by specially trained divers.
    08
     
    3月
    Frank Ilg (left, Head of Future Products & Technology) and Thomas Imbacher (Managing Director Innovation & Marketing) are happy about the award together with the whole PERI team.

    プレスリリース

    PERI is one of Germany's Top 100 Innovators

    PERI, one of the world's leading manufacturers of formwork and scaffolding systems, was awarded “Top Innovator 2021” in the context of the Germany-wide TOP 100 innovation competition.
    24
     
    2月
    Čortanovci Viaduct, Novi Sad, Serbia: The two-lane superstructure in section C was realised in only five cycles using MULTIFLEX Girder Slab Formwork.
    Čortanovci Viaduct, Novi Sad, Serbia: PERI UP supported the MULTIFLEX Girder Slab Formwork with a support height of up to 20.00 m.
    Čortanovci Viaduct, Novi Sad, Serbia: In section B, the ALPHAKIT Shoring Construction Kit was chosen specifically because it is designed for a support height of up to 30.00 m.

    プレスリリース

    Clear the way for the new Čortanovci Viaduct on the Budapest-Belgrade high-speed line

    The Budapest-Belgrade line is part, and the first stage, of the planned international railway connection Budapest-Belgrade-Skopje-Athens and is currently one of the largest investment and infrastructure construction sites in the eastern part of Europe. PERI supported the construction of the Čortanovci Viaduct on the Serbian section between Stara Pazova and Novi Sad - and in addition to intensive on-site support, also provided cleverly combinable system solutions based on the modular principle.
    24
     
    2月
    Christian Schwörer, current Chairman of the Advisory Board of the PERI Group, will be appointed CEO of PERI Group for a transitional period of initially 12-18 months.

    プレスリリース

    Christian Schwörer takes over as Chairman of the Management Board of PERI GmbH

    Christian Schwörer, current Chairman of the Advisory Board of the PERI Group, will be appointed CEO of PERI Group for a transitional period of initially 12-18 months.
    12
     
    1月
    Dr. Fabian Kracht, Managing Director Finance & Organisation and Spokesman of the Group Management of PERI GmbH, has decided to leave the company

    プレスリリース

    Personnel Change in the Group Management of PERI GmbH

    Dr. Fabian Kracht, Managing Director Finance & Organisation and Spokesman of the Group Management of PERI GmbH, has decided to leave the company by 30 June 2021 at the latest and start his own business.
    08
     
    1月
    City Palace Humboldt Forum, Berlin: PERI supplied economical formwork and scaffolding solutions from a single source for the reconstruction of the Berlin City Palace. In addition to fast shuttering and repositioning times, the on-site project support provided by the PERI engineers ensured that the very tight construction schedule could be adhered to.
    City Palace Humboldt Forum, Berlin: Due to the PERI solution with external CB Climbing Platforms, no facade scaffolding was required for the shell construction. For the round reinforced concrete walls of the dome, RUNDFLEX Circular Wall Formwork was used together with FB 180 Folding Platforms.
    City Palace Humboldt Forum, Berlin: The planning and supply of formwork and scaffolding from one source created a synergistic effect for the site management team.

    プレスリリース

    Concrete and baroque: formwork and scaffolding for Berlin's Humboldt Forum

    With the Humboldt Forum, a centre of art, culture, science and education opened in the historic centre of Berlin in December 2020. PERI supplied a large quantity of economical formwork and scaffolding solutions from a single source for the reconstruction of the Berlin City Palace. In addition to this well thought-out overall solution, the project support provided by PERI engineers during construction ensured that all requirements were met and the construction schedule was adhered to.
    15
     
    12月
    Pasteurs Tower, Copenhagen, Denmark: In the heart of Copenhagen, Pasteurs Tower, a 120-metre apartment building is being built, which will be the highest apartment building in Copenhagen when it is completed in 2022.
    Pasteurs Tower, Copenhagen, Denmark: The lowering head of the SKYMAX Large Panel Slab Formwork in combination with the MULTIPROP Aluminium Slab Props allowed fast formwork insertion and removal and resulted in the 6-day cycle being maintained.
    Pasteurs Tower, Copenhagen, Denmark: The RCS Rail Climbing System helped to minimise crane operating times and was also the comprehensive solution from PERI.

    プレスリリース

    Première of SKYMAX Large Panel Slab Formwork at the construction of Pasteurs Tower in Copenhagen

    In Carlsberg City, a district in the heart of Copenhagen, a completely new neighbourhood is being built. Several high-rise buildings are currently under construction there, and Pasteurs Tower will be the highest residential building in Copenhagen upon completion. Flats will be built on 33 of the 37 floors, and commercial enterprises will be located on four floors. PERI supported the project with a variety of formwork solutions. The special highlight: The first use of SKYMAX Large Panel Slab Formwork.
    17
     
    11月
    PERI 3D Construction Printing: BOD2 construction printer assembled
    PERI 3D Construction Printing: 3D construction printing process and -results

    プレスリリース

    PERI builds the first 3D-printed apartment building in Germany

    PERI GmbH has set about printing another residential building using a 3D construction printer, this time in Wallenhausen, Bavaria. At the end of September 2020, the family-owned company announced that work had begun on Germany’s first printed residential house in Beckum, North Rhine-Westphalia. Only two months later, work has begun on the next residential building to make use of 3D construction printing technology. Upon completion, the 5-in-a-block apartment building with around 380 square metres of living space will be the largest printed residential building in Europe. On this project, the printing process is expected to take six weeks.
    02
     
    11月
    The Kennedy Center is the largest arts centre in the American capital. The extension project “The REACH” has seen the construction of three additional buildings at the centre.
(Photo: Cowles Graphic Design)
    The three pavilions were built with architectural concrete of the highest quality.
(Photo: Cowles Graphic Design)
    The extension consists of the Welcome Pavilion, the River Pavilion, and the Skylight Pavilion.
(Photo: Cowles Graphic Design)

    プレスリリース

    PERI Architectural Concrete Project “The REACH” wins ACI Overall Excellence Award

    The building extension at the imposing Kennedy Center for the Performing Arts is commonly known as “The REACH”. It comprises three interconnected pavilions that stand out due to their exceptional architectural design and architectural concrete of the highest quality. The larger-than-life project won the American Concrete Institute’s Overall Excellence Award in October 2020 and is thus recognised as a project that unites particularly creative techniques with innovative technologies. For this special construction project, PERI developed a formwork concept that combined tried-and-tested standard systems with project-specific solutions. 
    29
     
    9月
    PERI prints first residential building in Germany with portal printer BOD2 in Beckum (North Rhine-Westphalia)
    PERI 3D-construction printing process

    プレスリリース

    PERI builds the first 3D-printed residential building in Germany

    PERI GmbH is building Germany’s first 3D-printed residential building in Beckum, North Rhine-Westphalia. The two-storey detached house with approx. 80 sqm of living space per floor is not being constructed in the conventional manner, it is being printed by a 3D construction printer.
    09
     
    9月
    TrIIIple, Vienna, Austria: Thanks to a competent support service and well-thought-out system utilisation, PERI is successfully constructing the complex building geometry, which is subject to stringent requirements.
    TrIIIple, Vienna, Austria: The building is depicted using BIM 360° Field even before construction begins.
    TrIIIple, Vienna, Austria: The VST Heavy-Duty Shoring Towers are secured to the building by retaining structures. The surface-mounted distribution platform serves to accommodate the PERI UP scaffolding.

    プレスリリース

    Project-specific solutions using unique combination of formwork and scaffold systems

    Thanks to a competent support service and well-thought-out system utilisation, PERI is successfully constructing the complex building geometry of the three TrIIIPle residential towers on the Danube Canal in Vienna, which is subject to stringent requirements. Safe working processes, optimised construction site logistics and cost-effective solutions see demanding building schedule adhered to.
    04
     
    8月
    PERI has worked intensively together with the specialists from COBOD on the further development of the technology and the opening up of new markets.
    The company Röser GmbH will use the printer at the new company location in Laupheim to print a wide variety of precast concrete parts.

    プレスリリース

    PERI sells first 3D construction printer

    Röser GmbH opts for 3D construction printer from PERI Successful conclusion to resolute development work of the past few years Printing technology shows huge potential for a wide range of construction applications  
    03
     
    8月
    Air traffic control tower, Buenos Aires-Ezeiza Airport, Buenos Aires, Argentina: The new air traffic control tower at Buenos Aires-Ezeiza Airport reaches a height of 108.40 m and provides a 360° field of vision over the entire airport complex.
    Air traffic control tower, Buenos Aires-Ezeiza Airport, Buenos Aires, Argentina: The air traffic control centre starts at a height of around 62 m and consists of five self-supporting platforms.
    Air traffic control tower, Buenos Aires-Ezeiza Airport, Buenos Aires, Argentina: The customised project solution was based on two compatible PERI Modular Construction Systems: VARIOKIT combined with PERI UP.

    プレスリリース

    Keeping an eye on everything: a new control tower for Buenos Aires-Ezeiza Airport

    With a total surface area of around 7,000 m², a height of 108.40 m and a 360° field of vision over the airport complex, the new air traffic control tower at Buenos Aires-Ezeiza Airport provides the basis for optimised visual monitoring and control of air traffic. PERI assisted with the complex construction work by providing tailor-made special-purpose formwork, closely coordinated formwork and scaffolding solutions, and much more.
    01
     
    7月
    Terfener Innbrücke, Terfens, Austria: The Terfener Innbrücke, which measures roughly 235 m in length, is situated on the A12 motorway in the Inntal valley in Tyrol. (Photo: Günther Bayerl)
    Terfener Innbrücke, Terfens, Austria: The project was carried out using the balanced cantilever construction method and the VBC Balanced Cantilever Carriage. The rentable system components of the VARIOKIT Engineering Construction Kit provided the basis for this. (Photo: Günther Bayerl)
    Terfener Innbrücke, Terfens, Austria: With the VBC Balanced Cantilever Carriage, it was possible to complete 5.70-m-long concreting sections on a weekly basis. (Photo: Günther Bayerl)

    プレスリリース

    Reconstruction of the “Terfener Innbrücke” bridge on the A12 motorway in Austria’s Inntal valley

    The Terfener Innbrücke reconstruction project on the A12 motorway in the Inntal valley is one of largest bridge construction projects currently being carried out in the west of Austria. With PERI by their side, the client has been successful in implementing the project according to the demanding construction schedule since construction began in 2018. In addition to providing comprehensive planning services and on-site support during the project, PERI has also made use of the VBC Balanced Cantilever Carriage for the first time in Central Europe.
    04
     
    5月
    PERI has delivered around 480 tonnes of formwork and scaffolding material to the client’s construction site in addition to providing comprehensive on-site support.
    On account of the subterranean position up against the ground earth, it was not possible to use end-to-end formwork ties when concreting the retaining walls. For this reason, a single-sided formwork solution was required.
    The columns were formed in a straightforward manner without any special-purpose components thanks to the integrated perforated strips on the LIWA Panel Formwork.

    プレスリリース

    Bandra Kurla Complex (BKC): PERI assists with the construction of Asia’s largest underground station

    The Bandra Kurla Complex (BKC) is an underground station on the Mumbai Metro, a rapid transit system that is currently under construction. The rapid transit system in the Indian metropolis will serve the city of Mumbai itself as well as its entire metropolitan area in the federal state of Maharashtra. By supplying comprehensive formwork and scaffolding solutions, PERI has been providing assistance since construction began on the major project in April 2019 so that the BKC can be completed within the demanding construction time-scale of only 14 months.
    01
     
    4月
    The gas compressor platform CA-KU-A1 was erected at the shipyard of Dragados Offshore in Tamaulipas/Mexico with the aid of comprehensive PERI scaffolding solutions.
    CA-KU-A1 has a weight of 23,900 tonnes and can compress around 450 MMcf of sour gas per day.
    It was possible to adapt the suspended working platforms variably in 25 cm increments to account for the gaps between the steel girders. Scaffold tubes and couplings were used to fix them to the steel girders of the platform.

    プレスリリース

    New platform for the Mexican oil and gas field Ku-Maloob-Zaap

    The oil and gas field Ku-Maloob-Zaap (KMZ), which covers a total area of around 121 km², is situated in the bay of Campeche, 105 km north-east of the city of Ciudad del Carmen. In 2019, a new gas compressor platform named CA-KU-A1 was added to the oil and gas production complex that is located there. To carry out the time-critical construction project, PERI provided flexible scaffolding solutions and comprehensive on-site support. 
    02
     
    3月
    The sustainable residential complex GIOIA 22 is situated at the heart of the Porta Nuova district of Milan and, upon completion, will cover 65 percent of its annual energy requirements using renewable energy sources. (Photo: Alberto Brevi)
    A characteristic feature of the building is its folded shape. It consists of a main core and secondary core. To achieve this, the first RCS Climbing Unit was installed using vertical as well as laterally inclined climbing rails. (Photo: Alberto Brevi)
    It was possible to form both the inclined and the straight columns using the SRS&nbsp;Circular&nbsp;Column&nbsp;Formwork. Using 4,000 linear metres of PROKIT improved safety levels for the personnel on the jobsite further still. (Photo: Alberto Brevi)

    プレスリリース

    Innovative and sustainable: PERI assists with the construction of the office complex GIOIA 22, Milan

    GIOIA 22 is setting new benchmarks in terms of sustainability: the 120 m tall tower at the heart of the Porta Nuova district will cover 65 percent of its annual energy requirements using renewable energy sources. The 30 storey tall building will provide enough space for approximately 2,700 people, 350 parking spaces and 13 lifts. PERI provided support during the construction process of this inventive project using a combination of tailor-made formwork and climbing solutions.
    07
     
    2月
    The principle of the innovative SKYMAX formwork solution is based on compatible components made of various materials. The result of this is a construction kit that paves the way for flexible solutions that will fulfil specific project requirements.
    Working with the SKYMAX system is remarkably simple due to the low number of different components. The system of combining the panels and heads is self-explanatory.
    The panel slab formwork can be installed safely and efficiently from the level below. The slab panels are slipped into the head from the installation surface below and pivoted upwards.

    プレスリリース

    Groundbreaking innovation for slab formwork procedures

    The safety requirements imposed on slab-forming procedures are becoming an increasingly significant issue. At formwork and scaffolding manufacturer PERI, ensuring safety during day-to-day work is priority number 1. PERI has unveiled the future-proof large panel formwork system SKYMAX, a groundbreaking innovation for formwork systems. Not only does the innovative principle significantly increase safety levels for users, it also improves the degree of economic efficiency.
    03
     
    2月
    The Al Bustan Street South construction project is one of four parts that make up the Sabah Al Ahmad Corridor infrastructure project and features bridges with a total length of more than 10 km.
    The PERI system solution was tailored to account for the specific circumstances on site as one of the great challenges of the project was to carry out the construction work without causing major disruption to traffic.
    Combining the modular VARIOKIT and PD 8 systems proved to be the ideal approach to establishing the superstructure formwork for the in-situ concrete bridge. PD 8 shoring, which was adjusted quickly and steplessly to the different heights, ensured that loads could be transferred in an optimum manner.

    プレスリリース

    Demanding infrastructure project underway in Doha

    Adherence to deadlines, efficiency and completion without interrupting the flow of traffic are the requirements that are of paramount importance during the Sabah Al Ahmad Corridor infrastructure project. For the construction phase on Al Bustan Street South, PERI made use of the PD 8 shoring system and a combination of systems from the PERI UP Flex portfolio in addition to a tailor-made VARIOKIT solution with VST heavy-duty shoring towers. The customer has therefore taken full advantage of the opportunity to procure time-saving formwork and scaffolding systems from a single source.
    03
     
    2月
    PERI Canteen
    PERI Canteen Inside

    プレスリリース

    PERI canteen awarded third best canteen in Germany!

    The canteen at the PERI headquarter in Weissenhorn has achieved 3rd place in the Germany-wide canteen test carried out by the magazine FOCUS and Food & Health e.V.
    23
     
    1月
    With this award, companies are honoured for extraordinary success in the implementation of measures to increase efficiency in the office area.

    プレスリリース

    PERI wins Office Excellence Award 2019

    PERI GmbH has received the Office Excellence Award 2019. With this award, companies are honoured for extraordinary success in the implementation of measures to increase efficiency in the office area. In recent years, Volkswagen, Daimler, Viessmann and Schmitz Cargobull were among the winning companies.
    03
     
    1月
    The large-scale project, SKY PARK, is the new cultural epicentre of Bratislava – in addition to customised scaffolding solutions, PERI made use of the RCS rail climbing system in combination with VARIO GT 24 girder wall formwork during the erection of the residential complexes.
(Photo: Penta Real Estate)
    The complex planning and construction of the façade scaffolding for the three 105-metre-high elliptical residential towers was the product of a collaboration between PERI Slovakia and PERI Czech Republic.
(Photo: Penta Real Estate)
    On account of the high axial forces, a combination of different PERI scaffold systems proved to be the optimal solution for erecting the façade.
(Photo: Penta Real Estate)

    プレスリリース

    Scaffolding solutions for three residential towers in the new cultural epicentre of Bratislava

    The new cultural epicentre of the region is currently being built in Bratislava: SKY PARK is a multi-functional centre that combines a modern living and working experience with public spaces. Spanning approximately 5 hectares, the site currently encompasses three residential towers, two office buildings, a large park area and the Jurkovič thermal power station, which is being refurbished as part of this major project. In addition to customised PERI scaffolding solutions, amongst others the PERI RCS rail climbing system in combination with the VARIO GT 24 girder wall formwork was used during the erection of the residential complexes. 
    10
     
    12月
    Official opening of the new PERI Vocational Training Centre
    Official opening of the new PERI Vocational Training Centre

    プレスリリース

    PERI opens new vocational training centre at its Weissenhorn headquarters

    PERI today opened the company's new vocational training centre at its headquarters in Weißenhorn. In total, the family-owned company is investing a single-digit million Euro amount in the new training facility.
    06
     
    12月
    The best: Participants and supervisors of the final round of the 12th PERI Construction Exercise.
    Place 1: Felix Ott from the Munich University of Applied Sciences with his supervisor, Professor Karl-Friedrich Bisani.

    プレスリリース

    Awards for the prize winners of the 12th PERI Construction Exercise

    PERI offers all educational institutions involved in the field of construction the opportunity to participate in its well-known Construction Exercise, which not only provides valuable experience with specific practical application but also the chance to win attractive cash prizes.
    02
     
    12月
    A total of 14 different, perfectly coordinated PERI system solutions are in use at the construction site of the Calgary Cancer Centre, providing support to the construction workers on site.
    The different storey heights, ranging from around 4 to 7 m, posed a significant challenge to the planning and design team.
    Over the course of this large project, a total of more than 15,000 m² of slab formwork will be used – including the SKYDECK system for construction of the underground garage.

    プレスリリース

    Wide range of PERI system solutions used during construction of the Calgary Cancer Centre

    The building of the Calgary Cancer Centre, a state-of-the-art cancer treatment and research centre, is not only the largest construction project currently being carried out in the province of Alberta in Canada, it is also the largest construction project PERI has ever taken on with regard to the volume of material on site. The use of 14 different perfectly coordinated PERI system solutions has made it possible to realise the complex design of the centre in an efficient manner.
    04
     
    11月
    PERI UP nestles up to Ulm Minster - up to 71 m high - for the extensive renovation work. A 7 m high intermediate platform provides a possible storage location for the new stones.
    The interior was measured without any as-built plans using 3D laser scanning and this was transferred into a 3D building model – providing the basis for the scaffold planning with PERI CAD.
    The 13,000 m³ PERI UP birdcage scaffold in the choir of Ulm Minster was constructed free standing – with no anchorages onto the historic building structure.

    プレスリリース

    Three construction sites – one church: Renovation work on Ulm Minster

    The 161.53 m high main tower of Ulm Minster is known as the highest church spire in the world – equally as impressive is the 29 m long, 15 m wide and 26 m high choir. PERI systems are currently assisting with the extensive renovation work on the vaulted ceiling and the choir stalls as part of the restoration of the main tower and the north-east, 86 m high choir tower.
    21
     
    10月
    Thomas Imbacher new Managing Director “Innovation & Marketing” in PERI Group Management

    プレスリリース

    New Managing Director “Innovation & Marketing”

    Effective November 1, 2019, Thomas Imbacher, Director of the Sales Region Central Europe, will take over the position as Managing Director “Innovation & Marketing” in the Group Management of PERI GmbH.
    02
     
    10月
    Not only did the SKYDECK speed up forming operations, it also provided a particularly high level of safety on the construction site.
    From above, the building looks like a triangle. This complex shape meant that all parties involved had to work with a high degree of precision and that tailor-made solutions from PERI had to be used.
    The PERI formwork and shoring solutions were optimally coordinated in order to achieve the desired shape of the building and meet its demanding architectural requirements. Thanks to the 25 cm or 50 cm end-to-end system grid, it was possible to adapt the modular scaffold system, PERI UP Flex, to the various geometries and loads in the form of a load-bearing construction.

    プレスリリース

    Customised PERI solutions for complex, architectural requirements

    PERI has contributed to the construction of the new research and development centre of Ferring Pharmaceuticals A/S in Copenhagen by supplying individual formwork and scaffolding solutions. The building, which looks like a triangle when viewed from the air, is being erected in a central location right next to the sea at the Øresund crossing between Copenhagen and Malmö. The use of pre-assembled VARIOKIT system solutions and SKYDECK slab formwork streamlined the procedure significantly. At the same time, PERI’s systems ensured that the architectural concrete was of the highest quality.
    02
     
    9月
    With the help of a crane, large-sized TRIO elements can be moved very quickly thus ensuring valuable time-savings. In one part of the airport building, walls up to 14 m high were realised.
    For processing a slab area of approx. 220,000 m² at a height of up to 17.50 m, the construction teams installed working platforms totalling 15,500 m² and featuring spans of up to 15 m whilst being supported by PERI UP Flex shoring.
    Istanbul Airport can accommodate 90 million passengers annually. A total of 13 different building contractors contributed to the completion using PERI systems. (Photo: İGA Havalimanları İnşaatı Adi Ortaklığı Ticari İşletmesi)

    プレスリリース

    PERI systems in use for construction of a new airport in Istanbul

    Istanbul Airport can accommodate around 90 million passengers per year but can easily be expanded in order to handle up to 200 million passengers annually. Two gigantic terminal buildings have been planned to deal with this enormous increase in passenger volume - the first terminal alone provides 1.44 million m² of effective area. Various PERI systems were used in the construction of the terminal building as well as for realising other structures.
    01
     
    8月
    The new Puente Pumarejo in Latin American has a length of 2.3 km. The complex-shaped pylons rise up to a height of 80 m.
    Perfectly matched to suit the formwork solution, PERI UP Flex Shoring Towers and ST 100 Stacking Towers formed high load-bearing supporting constructions with heights between 5 m and 22 m in the bridge edge areas. PERI UP also served to provide stair access in order to safely reach the higher working levels.
    CB 240 Climbing Platforms, together with TRIO Wall Formwork, formed safe and accurate crane-climbed units for forming the pylons. In the area of the pier heads, VARIOKIT Truss Girders served as a reliable supporting construction for the working platform.

    プレスリリース

    Record-breaking bridge successfully completed with PERI systems

    The new cable-stayed bridge over the Rio Magdalena is 2.3 km long. PERI engineers supported the challenging construction project by providing a customised formwork and scaffolding solution that has been designed for realising the simultaneous construction of the pylons, bridge piers along with the superstructure. The versatility of the formwork and scaffolding systems as well as the combination possibility with the VARIOKIT Engineering Construction Kit facilitated shortened assembly times also when dealing with complex geometries.