SKS Single Sided Climbing System
More images
|
The modular forming system for single-face climbing applications
With the PERI SKSF 240 and SKS 180 climbing systems, the loads from the fresh concrete pressure are transferred through the brackets by means of V-strongbacks and compression braces into the scaffold anchors.
Typical applications for the SKSF 240 and SKS 180 are dams, locks, cooling towers, pier heads, tunnels, and bank vaults.
SKSF 240:
With the 2.40 m wide SKSF 240, the formwork is mounted on a carriage which can be retracted by 60 cm without the need of a crane. This means reinforcement work, assembly of scaffold anchors, and the installation and dismantling of box-outs is made much easier.
SKS 180:
The formwork is simply tilted backwards when striking takes place. The 1.80 m wide bracket requires only a minimum of space and provides an inexpensive alternative to the SKSF 240.
|
Advantages
|
|
Stable and cost-effective for high loads
Generous bracket spacings allow large-area formwork units with optimal utilization of the bearing capacity. This leads to extremely economical solutions.
Economical and safe anchoring
The M30/DW20 and M36/DW26 climbing cones have been designed especially for single-sided concreting using SKS/SSC in dam construction, and to allow the transfer of high tensile and shear forces into the still fresh, unreinforced concrete. The corrosion-protected cones can be re-used – only the tie rods and threaded anchor plates remain in the concrete.
Simple and flexible planning
With PERI SKSF 240 and SKS 180 single-sided climbing formwork, circular structures can also be concreted without undergoing any large planning process. Even use on inclined walls is feasible without any special measures because additional concrete loads or lifting forces can be safely transferred into the structure.
|
|
|
|
